|
Fortress Safes
Model FB3060
Available in
Granite / Emerald colors
$1199.99
|
- Heavy Guage Steel Body
|
- 40 Minute Fire
Rating |
| - Solid Steel Door |
- 1" Active Locking
Bolts |
| - Triple Relocker |
- Concealed Internal
Hinge |
| - UL Listed Combo Lock |
- Durable Granite
Finish |
| - Chrome Handle |
- Chrome Dial |
| - Suede Interior Fabric |
- Limited Lifetime
Warranty |
|
- 18 Expand to 27 Gun Interior
|
|
|
|
| - UL Listed and Certified |
- Diam-a-Shield hard plate |
| - heavy gauge body |
- Drill proof ball bearing design |
| - High Gloss Finish |
- 1 1/4" diameter lock bolts |
| - Solid 3/8 inch door |
- 4-way active lock bolts |
| - 1 5/8 inch firewall |
- Bank style combination lock |
| - Quad Sleeve relockers |
- Solid steel door frame |
|
- Detent
system
|
-
Plush Terry Velour/Suede Interior Colors |
|
Heritage Centennial
Model CX3066
Available in
Granite / Sandstone
$1449.99
|
|
| - UL Listed and
Certified |
- Diam-a-Shield hard
plate |
| - Heavy gauge body |
- Drill proof ball
bearings |
| - Durable textured
finish |
- 1 1/4" diameter lock
bolts |
| - Solid 3/8 inch door |
- 4-Way active lock
bolts |
| - 1 5/8 inch firewall |
- Bank style combination
lock |
| - Quad Sleeve relockers |
- Solid steel door frame |
|
- Detent
system
|
-
Plush Terry Velour/Suede Interior Colors |
Four Exterior Colors
|
|
Fortress Safes
Models FS3060
Braun / Regal
$749.99 / 749.99
| - U.L. Listed and Certified |
- ITR
Class II 60-Minute Fire Certification |
| - 1/8-inch steel body |
- 1 1/8-inch thick body
construction |
| - U.L. listed mechanical lock |
- ¼-inch solid door
plate (4-inch overall) |
| - Positive deadlock system |
- Diam-a-Shield™ ball
bearing hard plate |
| - Six 1-inch live lock bolts |
- Quad Sleeve™ relocker |
| - 1 1/8-inch firewall |
- Hinge-side deadlock
bar |
| - One 1-inch live top bolt |
- Concealed ball bearing
hinges |
| - Lifetime warranty |
- Smooth gunmetal gray
velour interior  |
|
|
Standard Security Features of a Heritage
Safe
|
| |
|
 Active Lock Bolts
Heritage safes have as many as 22 active
lock bolts up to 1 1/2-inch in diameter that extend
a full 2-inches (twice as far as most brands)to lock
securely behind the solid reinforced door frame. |
With only 1/64 of an inch of
tolerance around each of our locking bolts, the need
for extra support items is not necessary. Adding
items such as bolt guides or other plastic devices
can jeopardize the integrity and fire protection of
the safe. |
|
Recessed Solid
Steel Door
Doors on Heritage safes, built with the highest
tolerance standards, are fully recessed into the
solid reinforced safe body, |
reducing
pry-points and preventing attack around the door
edges. The door frame is constructed of solid
5/8-inch steel for extra strength. |
|
Seamless Body Design
Heavy body construction (up to 50 percent heavier
than other comparable brands) with fully |
penetrated continuous welds add strength to corners
and edges of Heritage safes. |
|
| Concealed Internal Hinges
|
Internal hinges on all Heritage safes eliminate
one of the most attacked critical points of the
safe. The internal ball bearing design disguises the
direction of opening and deters attack. |
|
| Ball Bearing Protection |
Drill proof ball bearing protection safe-guards
against drilling to critical areas. |
|
| Diam-a-Shield™ Hard Plates |
Behind critical areas of a Heritage door is a
solid hard plate to protect the lock, relockers and
other critical areas. Diam-a-shield™ provides 30
times the drilling protection of other brands. |
|
| Quad Sleeve™ Relockers
|
Quad sleeve™ relockers are designed to trigger
when the safe is attacked by torch, impact, or
prying, resulting in a complete lockup of the
Heritage safe. |
|
| Positive–Deadlock System
|
Heavy positive - deadlock locking mechanism is
engineered for security. Heritage lock bolts cannot
be forced into the lock mechanism regardless of the
side impact forced upon them. |
|
UL Listed Bank-Style Lock
|
UL listed combination locks, the
best in the industry, set the standard for security
and reliability. Every Heritage safe comes standard
with a UL listed Group II lock. |
|
 |
Palusol® Fire Seal
Palusol® expands with development of foaming pressure
under the action of heat. In the process a fine porous,
compression resistant, non combustible, heat seal is
formed. This seal fills joints around the safe door to
provide superior protection against smoke and heat. |
